1.选用耐黄PU胶 Choose yellowing-resisting PU adhesive. 2.选用耐黄变型固化剂 Choose yellowing-resisting hardener. 3.在粘合界面间的溢胶处涂上耐黄变覆盖液 Brush yellowing resistant repairing agent to cover over-applied. 4.选用耐黄...

1.改用抗拉丝型胶水 Choose non-silking adhesive. 2.增加烘箱与加压机间的距离 Increase the distance of oven between press machine....

1.打磨尽量均匀 Buffing everywhere. 2.尽量加压到位 Pressuring everywhere. 3.涂胶要均匀 Brush should every where....

1.提高固化剂用量 Add more hardener. 2.提高烘箱温度或减慢流水线速度 Raise the temperature of oven or lower the speed of assembly line. 3.调整烘箱温度至60-65℃ Adjust the temperature of oven to 60-65℃...

1.想办法加压到位,尤其是鞋子边缘部位, 最好先用锤子压贴或用轮子滚压 Pressing should be everywhere, particularly around the shoe. It’s better to use hammer or rolling wheel to press. 2.多上一次胶 Brush adhesive again. 3.缩短烘箱与加压机间...

1.对于牛皮、PU覆膜皮,打磨均匀到位,并尽可能深 些,最好处处白色起毛 Leather should be roughed everywhere and deep enough. 2.人革面应选用相应处理剂处理 Choose proper primer for upper. 3.处理剂必须烘干并调高烘箱温度 Primer must be dried and increase t...

1.橡胶底尽量打磨至所有光亮面消失 Rubber sole should roughed everywhere. 2.准确辨别鞋底材料类型、选用相应的处理水 Choose proper primer according to the sole.3.适当调高烘箱温度必须将处理剂烘干 Primer of sole must be dried, increase the temper...